Why px/s and words per minute are both here
Scroll speed is really a pixels-per-second value: how fast the text physically moves. Almost nobody thinks in px/s, though; people think in reading pace. The words-per-minute slider converts your target pace into the right px/s for your current font size, line spacing and line width, so making the text bigger does not silently make you read faster. The estimate is based on an average word length, so treat it as a starting point and fine-tune by ear.
Using it with a beam-splitter rig
A hardware teleprompter places half-silvered glass at an angle in front of the camera lens, with a screen facing up into it. You read the reflection in the glass while the camera shoots straight through it. Because a reflection reverses left and right, the screen underneath has to show mirrored text, which is what Mirror does. Some rigs and monitor mounts also invert the image, and Flip handles that. Open this page on the tablet or monitor that feeds the rig, press F for fullscreen, and pair a Bluetooth clicker or pedal so you can control it from the presenter's position.
Getting your eye line right
Without a rig, the trick is distance. Place the browser window as close to the webcam as you can, directly below it, and keep the line width narrow so your eyes move as little as possible. Set the reading guide to 15 or 20 percent from the top so the line you read sits nearest the lens. The camera preview shows you behind the text, so you can check framing and how much your eyes move before you record. Test your setup first with the webcam test and microphone test.
Pairing this with a recording
Once your script and pace feel right, record the take. Clipy's webcam recorder captures camera clips in the browser, and the voice recorder handles voiceovers. For screen walkthroughs, Clipy records your screen and camera together and gives you a share link when you stop, with a transcript your teammates and coding agents can read.