Loom Video Downloader

Loom Video Downloader: Free, Unlimited, No Signup

Unlimited, 5 at a time, ready in ~7s

QUICK ANSWER

Free, unlimited, and the fastest way to get a Loom video out as a real MP4. Paste up to five public Loom links at once, pick Auto, 1080p, 720p, or 480p, and each file downloads straight through Chrome under its own Loom title. Come back as often as you like: there is no daily cap, no signup, no watermark, no Loom subscription, and nothing to install.

Unlimited downloads
5 Loom links in one go
480p to 1080p quality
No signup
No watermark
Chrome-native downloads
Works on phone browsers too

47,994+ Loom videos rescued

Loom share URLs

0 valid Loom links5 max per run

Quality

Only works for public Loom share links - private or password-protected videos cannot be downloaded.

Why it is the fastest

Most Loom videos are ready in about seven seconds.

That is the real median across 47,994+ Loom videos rescued, not a best case. Nine in ten finish inside 46 seconds, and the long tail is almost always a very long recording rather than a slow queue. Here is what makes the difference.

Segments fetched in parallel

A Loom recording is not one file. It is a playlist of dozens of short media segments. Most downloaders pull them one after another down a single connection, so the wait is the sum of every round trip. Clipy opens many at once and reassembles them, so the wait is closer to the slowest one.

Remuxed, not re-encoded

When Loom already gives us H.264 video and AAC audio, which is most recordings, Clipy rewrites the container and leaves the pixels alone. That is close to a file copy. Tools that re-encode every video are paying for a full transcode you did not need, and quality drops on the way through.

Delivered from a CDN edge

The finished MP4 is handed to a CDN node near you rather than streamed back out of one application server in one region. The last hop stops being the bottleneck.

Five at a time, unlimited runs

Paste up to five public Loom links at once and get five separate MP4s, each named after its own Loom title. Then do it again, as many times as you like. There is no daily cap and no lifetime limit. Most downloaders take one link per run and put the rest behind an account.

What you will never be asked for

No daily or lifetime download cap
No credit card
No signup or email
No watermark, ever
No browser extension to install
No Loom subscription
No file size or length cap
No queue or paid priority tier
Files auto deleted within 24 hours

Clipy makes money from the screen recorder, not from this page. The downloader stays free because it costs us very little to run and it is how most people meet us.

Leaving Loom? Move the whole library

Need more than five at a time? Move the whole library.

If you are pulling videos because you are leaving Loom, migration moves the whole set in one pass. Every recording arrives under your own share link, with no watermark and no viewer sign-up, and it keeps its Loom title. Bulk migration is part of the paid plans, from $9 a month, and your first five single-video moves are free to try.

Your whole library, not five at a time
Keeps the original titles
Share links that need no account to watch
First five single-video moves are free

Upgrade and migrate How migration works

The downloader on this page stays free either way. No card, no account, no limit on how many times you come back.

Why this tool exists

Only public Loom share links can be downloaded.
No signup, watermark, or lifetime download gate.
Prepared files are deleted about two hours after they are made.

48000+ conversions and counting

Trusted by creators at startups, agencies, and Fortune 500 teams.

Free forever, no signup, no watermark.

How it works

1
Paste up to five public Loom links
Copy each Loom share URL and paste it into the box, one per line. Private, workspace-only, and password-protected recordings are not bypassed.
2
Choose the MP4 quality
Leave quality on Auto for Loom's best available stream, or choose 1080p, 720p, or 480p when you need a particular file size.
3
Prepare and download each file
Clipy prepares the links one by one. When the batch is ready, use the download button beside each Loom video to send it directly to Chrome.

Can you download a Loom video?

Yes, if it is your recording or a public Loom video you have permission to use. Clipy reads the same public media stream used by Loom's player and packages it as a normal MP4. Private and password-protected recordings remain protected.

How does Loom-to-MP4 conversion work?

Loom stores recordings as HLS or DASH playlists made from short media segments. Clipy selects the requested quality, fetches those segments in parallel, and either remuxes compatible streams or converts WebM codecs to H.264/AAC. The finished file is sent to Chrome with the title supplied by Loom.

Why download Loom videos as MP4?

A local MP4 gives you a backup that does not depend on a Loom workspace, subscription, or live share link. It can be played offline, attached to a message, archived with a project, or opened directly in editing software.

Do more with the file

Once the MP4 is on your machine, the rest of the toolkit is free too: turn a clip into a shareable animation with the Loom to GIF converter, pull just the audio with Loom to MP3, or grab videos in one click with the Chrome extension. If the downloads are part of leaving Loom, the Loom alternative comparison and the switch-off-Loom checklist cover the whole move.

Was this Loom video downloader helpful?

Why is Clipy the fastest Loom downloader?

Three reasons, and they compound. A Loom recording is not one file, it is a playlist of dozens of short media segments. Most downloaders pull those segments one after another down a single connection. Clipy fetches them in parallel, so a video that arrives in dozens of serial round trips somewhere else arrives in a handful here. Second, when the source is already H.264 video and AAC audio, Clipy remuxes the container rather than re-encoding, which is close to a file copy instead of a full transcode. Third, the finished MP4 is served from a CDN edge near you rather than streamed back out of one application server. Most downloaders also cap you at a single link per run and gate the rest behind a signup. Clipy takes five at once, free, with no account.

Can I download five Loom videos at once?

Yes, and it is the same free flow. Paste up to five public Loom share links into the box, one per line, and Clipy prepares each one and hands you five separate MP4s, each named after its own Loom title. That is the fastest way to pull a set of recordings before a workspace is cancelled. If you need the whole library rather than five at a time, the migration flow at /migrate-from-loom takes a CSV of up to 1,000 links and runs server side.

Why do people download Loom videos?

Four reasons come up constantly. Backup: Loom's free plan caps libraries at 25 videos of 5 minutes each, so recordings past the cap quietly stop being playable unless you saved the MP4. Offline sharing: a Loom link needs internet and Loom's player, while an MP4 plays anywhere, attaches to an email, and uploads to Slack. Re-editing: Loom only trims inside its own UI, but a local MP4 opens in iMovie, Premiere, CapCut, or Descript. And migration: if you are leaving after the Atlassian pricing changes, downloading your library first means you keep your history.

What happens when Loom uses a different codec?

Some newer Loom recordings use DASH and WebM codecs. Clipy converts those sources to H.264 video and AAC audio so the result is still a standard MP4 that opens in QuickTime, VLC, editors, and modern browsers.

How does Clipy handle the downloaded file?

The prepared MP4 sits behind an unguessable CDN URL and is deleted roughly two hours after it is made. A sweep runs every hour and removes anything past that age, so nothing survives longer than about three hours even in the worst case. Clipy does not add a watermark or put a login screen between you and the download.

Common questions

How do I download a Loom video as MP4?

Paste the public Loom share URL into this page, choose Auto or a target quality, and prepare the download. For a batch, paste up to five links and download each finished MP4 from the ready dialog.

Is there a limit on how many Loom videos I can download?

No. Downloads are unlimited: there is no daily cap, no lifetime cap, and no paid tier that unlocks more. Each run takes up to five links at once, and you can run it as many times as you like.

Do I need an account or a credit card to download?

No. There is no signup, no email, no credit card, and no browser extension. Paste a public Loom link and the MP4 downloads through Chrome. Prepared files are deleted about two hours after they are made.

Is this the fastest Loom downloader?

By our own measurements, most videos are ready in about seven seconds and nine in ten finish inside 46 seconds. Three things make the difference: Clipy fetches the media segments of a Loom recording in parallel rather than one after another, it remuxes H.264 and AAC sources instead of re-encoding them, and it serves the finished file from a CDN edge rather than one application server.

Can I download several Loom videos at once?

Yes. You can paste up to five public Loom links per run. Clipy prepares them one by one and then shows a single list where you can download each MP4.

What quality and format will I get?

The output is an MP4. Auto selects Loom's best available stream, while the quality selector can target 1080p, 720p, or 480p when Loom exposes those variants.

Why can Clipy be faster than other Loom downloaders?

Clipy fetches segments in parallel, avoids re-encoding compatible H.264/AAC streams, and serves finished files through a CDN instead of a single application server.

Do I need a Clipy or Loom account?

No. Public Loom share links can be downloaded without signing in to Clipy or Loom. Private and password-protected videos still require their original Loom permissions.

Can I download private Loom videos?

No. Clipy only downloads media exposed by a public Loom share link. It does not bypass Loom authentication, workspace permissions, or passwords.

Can I download a Loom video on my phone?

Yes. The downloader runs in the browser, so it works in Safari on iPhone and Chrome on Android the same way it does on desktop. Paste the Loom link, choose the quality, and the MP4 saves to your phone's downloads.

Can I import my whole Loom library at once?

Yes, through the migration flow rather than this page. Paste up to a few links at a time, or upload the CSV export from your Loom workspace for up to 1,000 links, and Clipy fetches each recording server side. Single imports are free, bulk migration is part of the paid plans.

Why migrate from Loom to Clipy instead of just downloading?

Downloading leaves you with a folder of MP4s and no library: no share links, no viewer page, nothing searchable. Migrating moves the recordings across under your own share links, keeps the Loom titles, and drops the viewer sign-up wall and the watermark. It is also the only route that scales past five videos.

What does moving off Loom cost?

Your first five single-video migrations are free. Moving a whole library, bulk runs and CSV batches, is part of the paid plans, from $9 a month. There is also a free month of Clipy Pro to try the recorder itself. The downloader on this page stays free regardless.

Tool not working the way you expect?

Tell us what broke. We resolve every report within 24 hours.

Send feedback →